Announcement

Collapse
No announcement yet.

Value Leader Cruise Control

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Value Leader Cruise Control

    Hi I've found a steering wheel and buttons to add cruise to my value leader, what next? Where do I connect the wires from the buttons to? Anyone who has done this before?

  • #2
    Re: Value Leader Cruise Control

    All the wires would connect to the BCM (Body control module) You would need to unplug one of the large connectors and add multiple pins to it and wire your cruise control switch to those.

    Then there's no telling the BCM would recognize the signals and the cruise control would just work. It could then need additional programming to make it work. And not many people or dealers do BCM flashes for cheap.

    Alternatively you can get an aftermarket cruise control kit that fits the G6.

    Comment


    • #3
      Re: Value Leader Cruise Control

      How does the aftermarket connect to the BCM?

      Comment


      • #4
        Re: Value Leader Cruise Control

        Here's a video of one companies method:


        The kits they sell seem over priced though compared to what I've found on amazon.

        Comment


        • #5
          Re: Value Leader Cruise Control

          I've seen that video. That video only talks about one wire. If a person knew nothing else they would assume from this video that the whole installation only consists of one wire. I haven't done it yet but it seems like there's got to be more than that. I guess what I'm interested in is "the rest of the story." Sigh.

          Comment


          • #6
            Re: Value Leader Cruise Control

            I agree, for a company that does aftermarket products they're instruction video is very lacking.
            I went to their website and looked up the product they advertise to work for our vehicles:

            Searching for the best cruise control system for your 2006-2010 Pontiac G6 vehicle? Visit The Cruise Control Store for a complete Rostra kit today.


            Towards the bottom it shows installation instructions, Here's the PDF to that, looks like they go over the other connections later in the instructions:

            Comment


            • #7
              Re: Value Leader Cruise Control

              Do you have a 3 or 4 spoke steering wheel?

              The 3 spoke has the controls on the left. The 4 spoke was either all on the left if you had radio controls, or left and right if you just had cruise.
              2007 Pontiac G6 3.5L V6 | 1998 BMW Z3 Dinan

              Comment


              • #8
                Re: Value Leader Cruise Control

                This should also help. It is about Radio Controls and the 3 spoke wheel, but you can get the idea and the pictures help.

                2007 Pontiac G6 3.5L V6 | 1998 BMW Z3 Dinan

                Comment


                • #9
                  Re: Value Leader Cruise Control


                  Read this too
                  2007 Pontiac G6 3.5L V6 | 1998 BMW Z3 Dinan

                  Comment

                  Working...
                  X