Ok I’ve done a little search. Unfortunately I’ve only got the phone to search with. Here’s what I got. I have po443 code. I have found that I’m not getting the ground from the ecm to the evap in the back by the tank. I have power but no ground. I have found the wire out of ecm and don’t have ground out of it. So what’s my next step to try and solve my problem. Thanks
Announcement
Collapse
No announcement yet.
2006 g6 ecm question
Collapse
X
-
Re: 2006 g6 ecm question
I guess I’m wondering if there is something else I can test. what are your thoughts on if the ecm is faulty or is there something else causing single lost to the evap solenoid by the tank. Like I mentioned above, I have positive volts to the plug but not a ground which the way I understand the ecm sends a ground to the solenoid which opens the vent. Thanks
Comment