Hi I've found a steering wheel and buttons to add cruise to my value leader, what next? Where do I connect the wires from the buttons to? Anyone who has done this before?
Announcement
Collapse
No announcement yet.
Value Leader Cruise Control
Collapse
X
-
Re: Value Leader Cruise Control
All the wires would connect to the BCM (Body control module) You would need to unplug one of the large connectors and add multiple pins to it and wire your cruise control switch to those.
Then there's no telling the BCM would recognize the signals and the cruise control would just work. It could then need additional programming to make it work. And not many people or dealers do BCM flashes for cheap.
Alternatively you can get an aftermarket cruise control kit that fits the G6.
-
Re: Value Leader Cruise Control
Here's a video of one companies method:
For an easy-to-install cruise control kit for your Pontiac G5, Pontiac G6, or Chevy Cobalt, check out The Cruise Control Store. http://www.thecruisecontrolst...
The kits they sell seem over priced though compared to what I've found on amazon.
Comment
-
Re: Value Leader Cruise Control
I've seen that video. That video only talks about one wire. If a person knew nothing else they would assume from this video that the whole installation only consists of one wire. I haven't done it yet but it seems like there's got to be more than that. I guess what I'm interested in is "the rest of the story." Sigh.
Comment
-
Re: Value Leader Cruise Control
I agree, for a company that does aftermarket products they're instruction video is very lacking.
I went to their website and looked up the product they advertise to work for our vehicles:
Searching for the best cruise control system for your 2006-2010 Pontiac G6 vehicle? Visit The Cruise Control Store for a complete Rostra kit today.
Towards the bottom it shows installation instructions, Here's the PDF to that, looks like they go over the other connections later in the instructions:
Comment
Comment