Announcement

Collapse
No announcement yet.

Will these wheels work on my car?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will these wheels work on my car?

    i've got the stock 17 inch rims and am looking to get some new ones.
    17x7 Enkei EKM3 5x114.3

    are these going to fit, and how can I tell for future purchases? thanks

  • #2
    Re: Will these wheels work on my car?

    Our G6 bolt pattern is 5x110 with 65.1mm hub bore. You need adapters or find a blank set of wheels for our 5x110 bolt pattern to be drilled.

    Comment


    • #3
      Re: Will these wheels work on my car?

      Where could I find adapters and what should I be looking for ?

      Comment


      • #4
        Re: Will these wheels work on my car?

        I ordered a set of 1" Adapters to go from 5x110 to 5x114.3 from eBay. It allowed me to fit the RX8 wheels on my car, luckily the offset of the wheels worked out.

        Comment


        • #5
          Re: Will these wheels work on my car?

          Something like this? https://www.amazon.com/dp/B00HQPGOAM..._qK1lybHBXTFPE
          Last edited by suo; 11-18-2016, 02:41 PM.

          Comment


          • #6
            Re: Will these wheels work on my car?

            Originally posted by suo View Post
            What adapters would I be looking for
            Something like this should do the job.


            Just need to keep in mind this moves the mounting point 1" further out from the vehicle. So wheel offset does apply.
            The adapters open up a LARGE variety of wheels you can fit, then it's just a matter of sizing em up right.

            Comment


            • #7
              Re: Will these wheels work on my car?

              Thanks I'll check into that. Don't really know much about this stuff, how would I check if the offset will work fine

              Comment


              • #8
                Re: Will these wheels work on my car?

                so the offset of stock rims seems to be around +42mm and the offset of the enkei wheels is +38mm. if I add the inch adapters i'm going to be looking at +21mm offset over. what can I do to make it right?
                Last edited by suo; 11-18-2016, 09:28 PM.

                Comment

                Working...
                X