I took my 05 Pontiac G6 sedan to get an oil change the other day and what do you know they called me back saying I need to replace my right lower control arm with ball joint. I had the right lower ball joint replaced about 40k miles ago. Apparently, their is a bunch of clay built up into it. They gave me an estimate of $551 with a computerized 4 wheel align. Is this a good price or am I getting screwed over? I just moved to Columbus, Ohio so I don't know of any shops that I can trust.
Announcement
Collapse
No announcement yet.
Right Lower Control Arm w/ Ball Joint Replacement
Collapse
X
-
Re: Right Lower Control Arm w/ Ball Joint Replacement
The part it $70 through parts geek(http://www.partsgeek.com/lc57b9p-pon...ac+Control+Arm).
If you have changed a strut then you can do it yourself. Probably take 1-2 hours depending on how recently the fasteners were touched.
I would say it is a little on the expensive side but i haven had a shop do work on my car in several years. I would just go off of a base labor rate of $85-100 an hours plus parts. You do the math.
Comment
-
Re: Right Lower Control Arm w/ Ball Joint Replacement
Thanks for reply's. Unfortunately, I have never done any maintenance on my car and would have absolutely no idea what to do. I think I'm just going to bring it in to a different auto repair shop and see what their estimate is.
Also, when I drive on the highway recently I have been having to keep my wheel turned slightly to the left and at times my car will shake and make a noise. Could this be due to the arm and ball joint?
Comment
-
Re: Right Lower Control Arm w/ Ball Joint Replacement
Thanks for reply's. Unfortunately, I have never done any maintenance on my car and would have absolutely no idea what to do. I think I'm just going to bring it in to a different auto repair shop and see what their estimate is.
Also, when I drive on the highway recently I have been having to keep my wheel turned slightly to the left and at times my car will shake and make a noise. Could this be due to the arm and ball joint needing to be replaced?
Comment
-
Re: Right Lower Control Arm w/ Ball Joint Replacement
Control arms are known failure parts on G6's. Buy parts with warranties on them. I personally use Moog, but don't go cheap or else you'll be replacing it again in 30-40k miles.Current Mods: K&N Typhoon Air Intake System, 10000K DDM HID Lows and fogs, 6000K Highs, 18" Forte Nokturnal rims, Michelin Pilot HX MXM4 Tires, Chrome upper and lower grilles, self tinted tail lights, self painted interior pieces, RacingLine front strut tower bar, GT-R exhaust, Blue painted Calipers, Lampoon blue dart overlays, LED reverse lights, sometimes a WAMS tune,Brembo Brake Conversion, Cobalt SS rear Brake conversion, 15mm H&R Spacers, ATE Super Blue Racing Brake Fluid, Eagle Eye CCFL Headlights, Optima Yellow top Battery, Moog Control Arms & Tie rod ends, BMD SS Brake Lines, BMD Swaybar Links, White LED Gauge Lights,
RIPINDIAN WARRIORS1926-2010
Comment
Comment