Just wondering if you can buy midpipes with no cats and connect them to stock headers? Just want some extra rumble without buying headers if thats possible. plus, that way when i do headers i dont even have to buy any mid pipes
Announcement
Collapse
No announcement yet.
Stock Headers w/mid pipes?
Collapse
X
-
Stock Headers w/mid pipes?
sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADEDTags: None
-
Re: Stock Headers w/mid pipes?
I want to say that aftermarket mids wont connect the to stock exhaust manifolds, they'll bolt up to the flange for the exhaust going out the back but not to the manis because most headers end much further down then the stockers do--don't quote me on that thoughTRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
-
Re: Stock Headers w/mid pipes?
Originally posted by LoJac963I want to say that aftermarket mids wont connect the to stock exhaust manifolds, they'll bolt up to the flange for the exhaust going out the back but not to the manis because most headers end much further down then the stockers do
Comment
-
Re: Stock Headers w/mid pipes?
lolTRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
Comment
-
Re: Stock Headers w/mid pipes?
Originally posted by LoJac963I want to say that aftermarket mids wont connect the to stock exhaust manifolds, they'll bolt up to the flange for the exhaust going out the back but not to the manis because most headers end much further down then the stockers do--don't quote me on that thoughsigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: Stock Headers w/mid pipes?
correct, all I know is certain headers require their own brand of mids so depending on the brand you may have fittment issues. If the mids say they'll fit right into the stock area then you'd be fine. Where you looking for them?TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
Comment
-
Re: Stock Headers w/mid pipes?
Originally posted by LoJac963correct, all I know is certain headers require their own brand of mids so depending on the brand you may have fittment issues. If the mids say they'll fit right into the stock area then you'd be fine. Where you looking for them?sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: Stock Headers w/mid pipes?
Kook mids bolt upto Kooks LT's atleast with G8's. PS mids probably only work with PS LT's also. I dont know how it is in the GTO world, but nobody makes a mid pipe to bolt upto the stock manifolds for the G8's.
2009 Liquid Red G8GT
4 door mafia
93 octane VMS ecm/tcm tune
8000k hid's
Solo Mach Shorty & HFC's
Rotofab cai and radiator cover
13.207@107.11
330 hp/328 tq on a Mustang dyno
Comment
-
Re: Stock Headers w/mid pipes?
Originally posted by mi04se1Kook mids bolt upto Kooks LT's atleast with G8's. PS mids probably only work with PS LT's also. I dont know how it is in the GTO world, but nobody makes a mid pipe to bolt upto the stock manifolds for the G8's.sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: Stock Headers w/mid pipes?
Yeah the PS midpipe isn't made to be used with the stock manifolds. You could gut your cats if you want a little more sound(watch out for emissions if you have them in your state)
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Stock Headers w/mid pipes?
Originally posted by leong6gtpYeah the PS midpipe isn't made to be used with the stock manifolds. You could gut your cats if you want a little more sound(watch out for emissions if you have them in your state)sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: Stock Headers w/mid pipes?
Originally posted by CrimsonGTPOriginally posted by leong6gtpYeah the PS midpipe isn't made to be used with the stock manifolds. You could gut your cats if you want a little more sound(watch out for emissions if you have them in your state)TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
Comment
-
Re: Stock Headers w/mid pipes?
My friend has PS on his Z28 the fitment was alright and they're holding up decently but out of the box they are no where near the design quality that kooks or ARH are.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Stock Headers w/mid pipes?
^yeah thats a given. It's really too bad that Kooks doesn't have any major competition, maybe stainless works, ARH but that's about it. Its either shell out a million dollars on headers or its completely cheap crap.......ughTRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
Comment
-
Re: Stock Headers w/mid pipes?
Buy used then and save a few hundred.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
Comment