Announcement

Collapse
No announcement yet.

Another gauge thread..........

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Another gauge thread..........

    Originally posted by CrimsonGTP
    Originally posted by LoJac963

    I'm still considering yours, however if I ever want to run dual gauges I can't because the second gauge is a dual setup is programmed differently at the factory. You can run dual gauges with 2 regular single gauges. BUT I'm still thinking about it and maybe just buying one and keeping my SCSS voltmeter but we'll see
    what? all i thought was that you do the ODBII splitter and u can run two. u dont have to buy them both at the same time i thought that they were the same but it if u got the pair it came with the splitter.
    apparently not, I was researching it on their website. Their is technically a master and slave I guess you could call it gauges in the dual gauge setup. The master has ALL the functions of the standard gauge. The slave only performs certain functions, it wont to the 1/4 mile times and things like that but yes the dual setup does come with the splitter cable. They specifically say on the site running two single gauges will not work. Too bad cause I would have bought your single gauge to fund your goat modding account-sorry mang
    TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.

    Comment


    • #17
      Re: Another gauge thread..........

      just a quick bump for everyone, I've decided to go with dual interceptors. I think I'm going with the black face and black bezel with the green letters/numbers. I'm also going to buy silver optional faces with "GTO" on them with brushed aluminum bezels just to see which setup I like the best. Its only another $40 for 2 optional faces and the brushed aluminum bezels so that's not bad at all IMO. I've just sold my stock radio with the AUX IN and in the process of selling the gauges so I am fully funded to pull the trigger on the dual interceptors.

      I may make a thread with a poll to ask everyone their opinions on the color for the gauge screen. Thanks again everyone for all your input!
      TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.

      Comment


      • #18
        Re: Another gauge thread..........

        Originally posted by LoJac963
        just a quick bump for everyone, I've decided to go with dual interceptors. I think I'm going with the black face and black bezel with the green letters/numbers. I'm also going to buy silver optional faces with "GTO" on them with brushed aluminum bezels just to see which setup I like the best. Its only another $40 for 2 optional faces and the brushed aluminum bezels so that's not bad at all IMO. I've just sold my stock radio with the AUX IN and in the process of selling the gauges so I am fully funded to pull the trigger on the dual interceptors.

        I may make a thread with a poll to ask everyone their opinions on the color for the gauge screen. Thanks again everyone for all your input!
        sigpic

        2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -

        GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian

        Turning and Stopping- Cquence Drilled and Slotted Rotors

        Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter

        Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,

        Fully modded G6 GTP-TRADED

        Comment


        • #19
          Re: Another gauge thread..........














          TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.

          Comment


          • #20
            Re: Another gauge thread..........

            Originally posted by LoJac963














            lol!! there were 2 reasons for that post.
            1. i still have my useless to me interceptor gauge...UGH
            2. u have oodles of money with ur RN job and now u can mod...and i must wait to sell this stuff that is in perfect condition, extremely discounted, that is totally awesome.

            just bein jealous. cant wait to see those bitchin gauges in the goat.


            ps gimme ur SAP grilles.
            sigpic

            2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -

            GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian

            Turning and Stopping- Cquence Drilled and Slotted Rotors

            Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter

            Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,

            Fully modded G6 GTP-TRADED

            Comment


            • #21
              Re: Another gauge thread..........

              ^actually my mom out of the blue gave me $1,200 as my grad present from nursing school and every penny of that went into the goat-that's the only reason I have all the mods I do. I have yet to get one full paycheck from the new RN job and that is only POOL so they only call me in when they need me so its not stable income which means I'm still at my worthless job making $11.48/hr after my awesome paycut..........

              As for your gauge, did you put it up on LS1gto?? I know my two SCSS gauges people are going nuts over, I'm sure they would over your interceptor-try that.

              Also the SAP's are repros from GTOgrills. I bought the primed ones with the honeycomb grills. They came with high build primer, spent a couple hours wet sanding then painted the silver and clear coat. If you want SAP's get the repros-no smurfin point in paying out the arse for real ones when the repros look just as good BUT HAVE STUDS AND BOLTS to hold them on istead of crappy clips!!
              TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.

              Comment


              • #22
                Re: Another gauge thread..........

                Originally posted by LoJac963
                ^actually my mom out of the blue gave me $1,200 as my grad present from nursing school and every penny of that went into the goat-that's the only reason I have all the mods I do. I have yet to get one full paycheck from the new RN job and that is only POOL so they only call me in when they need me so its not stable income which means I'm still at my worthless job making $11.48/hr after my awesome paycut..........

                As for your gauge, did you put it up on LS1gto?? I know my two SCSS gauges people are going nuts over, I'm sure they would over your interceptor-try that.

                Also the SAP's are repros from GTOgrills. I bought the primed ones with the honeycomb grills. They came with high build primer, spent a couple hours wet sanding then painted the silver and clear coat. If you want SAP's get the repros-no smurfin point in paying out the arse for real ones when the repros look just as good BUT HAVE STUDS AND BOLTS to hold them on istead of crappy clips!!
                yea i saw they have the repros on sale for 205 primered...i thought on it but id much rather keep the grilles stock, pc rims and get my exhaust, tinted tails and tint done. and yeah about LS1 im pretty sure itll sell on there but i need 100 posts!!!
                sigpic

                2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -

                GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian

                Turning and Stopping- Cquence Drilled and Slotted Rotors

                Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter

                Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,

                Fully modded G6 GTP-TRADED

                Comment


                • #23
                  Re: Another gauge thread..........

                  Originally posted by CrimsonGTP
                  Originally posted by LoJac963
                  ^actually my mom out of the blue gave me $1,200 as my grad present from nursing school and every penny of that went into the goat-that's the only reason I have all the mods I do. I have yet to get one full paycheck from the new RN job and that is only POOL so they only call me in when they need me so its not stable income which means I'm still at my worthless job making $11.48/hr after my awesome paycut..........

                  As for your gauge, did you put it up on LS1gto?? I know my two SCSS gauges people are going nuts over, I'm sure they would over your interceptor-try that.

                  Also the SAP's are repros from GTOgrills. I bought the primed ones with the honeycomb grills. They came with high build primer, spent a couple hours wet sanding then painted the silver and clear coat. If you want SAP's get the repros-no smurfin point in paying out the arse for real ones when the repros look just as good BUT HAVE STUDS AND BOLTS to hold them on istead of crappy clips!!
                  yea i saw they have the repros on sale for 205 primered...i thought on it but id much rather keep the grilles stock, pc rims and get my exhaust, tinted tails and tint done. and yeah about LS1 im pretty sure itll sell on there but i need 100 posts!!!
                  lol so funny, I went to post my radio and my gauges on Saturday. BAM!!!!!!!!!!!!!! you only have 83 posts FTMFL. So I whored it up till I hit 100 and put up the for sale threads
                  TRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.

                  Comment

                  Working...
                  X