Updated: We want this to be done and have products in our hands.. SO, C'mon people!
Here is the site you order for your GB Price!
Your kit will NOT ship until 10 people have purchased, this is how ALL of their GB's work!
The Following have paid in full.. and are awaiting the others to buy!
1. Emerson
2. TLS2000
3. GTP_Canuck
4. Jayco 59
5. Teelo
6. GTPguy
7. Sterling
8. MDMAS
9. Nikki
10. G6Performance
11. Malibu SS
LLBerios, Lojac, Simply red- whats up guys?
-------------------------------------------------------------------------------------
Kit requries riveting the brackets to the inside fender and to the hood, there is no way around this. These guys worked hard and really used their knowledge to get this kit to function perfectly and flawlessly. I could NOT be any happier with the quality of the product and the install to boot! I've dealt with a lot of vendors and companies in the past and Imust honestly say, these two guys are probably the most down to earth and BEST to deal with. I'd trust them with my daughter (if I had one) . Now, I went with the basic kit (which is great) but the Elite kit adds a higher quality gas spring strut for both sides, stainless contruction, and powdercoated brackets- where as the basic is a black spring strut with non finished brackets. Each hole had to be drilled and riveted into place. They will be including with your purchase the a full VEHICLE SPECIFIC color instruction manual forthe install, including all measurments, and god knows how many pics! Could not be any more straight forward and took these guys less than an hour from design, coontrcution, photography, and final install. I even got some cool Redline sticker! . Now the pics:
Sweet EVO receiving the treatment
Bracket riveted to the inside fender channel- clean as hell!
BRacket riveted to the hood- also a factory finish install!
Pics of the whole kit install (this is the ELITE kit, installed first for thier catalog pics.)
Pic of the two brackets just after instalation. Absolutly wonderful quality!
Close up of the bracket installed on the hood
Close up of the bracket installed on the fender
These will be availbel in about 1-2 weeks adn I'll let MDMAS post up the prcing and get the list going. Those who are "scared" of the install. don't be- piece of cake,. You'll need a drill, drill bit for the included rivets (they'll tell you the exact size), center punch, masking tape, and rivet gun (not expensive at all).
So.. I want to show the appreciate for the work these guys have done, I want to sell more than these guys can handle! This kit will work on sedan, coupe, GTP, GT, and Malibu.
Here is the site you order for your GB Price!
Your kit will NOT ship until 10 people have purchased, this is how ALL of their GB's work!
The Following have paid in full.. and are awaiting the others to buy!
1. Emerson
2. TLS2000
3. GTP_Canuck
4. Jayco 59
5. Teelo
6. GTPguy
7. Sterling
8. MDMAS
9. Nikki
10. G6Performance
11. Malibu SS
LLBerios, Lojac, Simply red- whats up guys?
-------------------------------------------------------------------------------------
Kit requries riveting the brackets to the inside fender and to the hood, there is no way around this. These guys worked hard and really used their knowledge to get this kit to function perfectly and flawlessly. I could NOT be any happier with the quality of the product and the install to boot! I've dealt with a lot of vendors and companies in the past and Imust honestly say, these two guys are probably the most down to earth and BEST to deal with. I'd trust them with my daughter (if I had one) . Now, I went with the basic kit (which is great) but the Elite kit adds a higher quality gas spring strut for both sides, stainless contruction, and powdercoated brackets- where as the basic is a black spring strut with non finished brackets. Each hole had to be drilled and riveted into place. They will be including with your purchase the a full VEHICLE SPECIFIC color instruction manual forthe install, including all measurments, and god knows how many pics! Could not be any more straight forward and took these guys less than an hour from design, coontrcution, photography, and final install. I even got some cool Redline sticker! . Now the pics:
Sweet EVO receiving the treatment
Bracket riveted to the inside fender channel- clean as hell!
BRacket riveted to the hood- also a factory finish install!
Pics of the whole kit install (this is the ELITE kit, installed first for thier catalog pics.)
Pic of the two brackets just after instalation. Absolutly wonderful quality!
Close up of the bracket installed on the hood
Close up of the bracket installed on the fender
These will be availbel in about 1-2 weeks adn I'll let MDMAS post up the prcing and get the list going. Those who are "scared" of the install. don't be- piece of cake,. You'll need a drill, drill bit for the included rivets (they'll tell you the exact size), center punch, masking tape, and rivet gun (not expensive at all).
So.. I want to show the appreciate for the work these guys have done, I want to sell more than these guys can handle! This kit will work on sedan, coupe, GTP, GT, and Malibu.
Comment