Announcement

Collapse
No announcement yet.

Interest List: Unqiue Coatings Projector Retrofit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Interest List: Unqiue Coatings Projector Retrofit

    So awhile back in the Cin City thread Chad from Unique Coatings had made a comment that

    Originally posted by cbrenn71
    i think we need to get an interest list going. see how many people would even be interested. If you have 20 interested, by the time it boils down after pricing, I only expect to have 5-10 intersted.

    During that time, i think everyone needs to voice what they would be looking for. the more unified/standardized the retros would become, obviously the lower i can go.

    I can throw out pricing, but there are so many variables when it comes to retrofitting, i think we need to have people let us know what they want, or else it will never work.
    I noticed that nothing has been done about this lately so I PM'd
    Chad and here's what he had to say:

    Originally posted by cbrenn71
    No, we have not, but feel free to get one started. We are looking for the forum to decide what they are looking for, rather than us try to decide for everyone.
    So, I think we need to get an interest and suggestion thread as to what people want to see.

    A few questions to think of and reply.
    1. What projectors? I'm thinking TSX.
    2. Spacers so there is no modification needed behind it, or have it flush with a possibility of modification needed to allow the projector to fit.
    3. Do we want the bezel for the projector to have a Angel eye in it?
    4. Dual projectors? Or single?

    I actually have questions to ask Chad yet.
    1. Is this going to be a scenario where you just buy the headlight, or will we be sending ours in?
    2. If we send ours in is there a core available?
    3. If they are a buy the headlights, will there be any refund if we do send our stockers in?

    Optional questions if it is a "Buy the headlights" scenario.
    1. Do we want both black and chrome availability?
    2. Audi LED strips on the bottom?

    Ultimately I think we want to aim for this cut off


    As for the interest list, I'll start it

    1.StruttinSoul

    Lunch breaks are the heroes of my stomache!
    Mods:

  • #2
    Re: Interest List: Unqiue Coatings Projector Retrofit

    1.StruttinSoul
    2.oomonte

    Comment


    • #3
      Re: Interest List: Unqiue Coatings Projector Retrofit

      I would like to see a set with dual projectors. Is there room for that though?

      Born: 2/16/2007 -- Best Time: 14.20 @ 98.61 MPH -- 240 WHP & 205 WTQ -- Blueprinted and Balanced

      - U.C. Tinted Tails - Dr. S Stage 3 - SRC Dyno Tune - Eibach Pro Kit - C.I. FPU - Scuba's Aux. Retrofit -
      - 08 SS/TC Brembo Conversion - Ported Heads & I.M - MACE I.M.S. - RacingLine MMI - O.T.T.P. SRS -
      - MMS Headers - ClassicPerformance Exhaust - Powerbond UDP - CF Catch Can - Racingline Strutbar -

      Comment


      • #4
        Re: Interest List: Unqiue Coatings Projector Retrofit

        Depending on if you can get Audi style lighting and Halos, I might be interested as well...

        It's not about how fast you get to your destination, it's about how you many heads
        you turn when you get there...


        My Progression Page
        CarDomainMySpace

        Comment


        • #5
          Re: Interest List: Unqiue Coatings Projector Retrofit

          im interested


          main goals which i already stated in the other thread


          1. great cutoff line
          2. no modification needed to frame behind headlight
          3. great light ouput


          everything else that can go into is optional for me

          Comment


          • #6
            Re: Interest List: Unqiue Coatings Projector Retrofit

            Originally posted by bluegtp33
            im interested


            main goals which i already stated in the other thread


            1. great cutoff line
            2. no modification needed to frame behind headlight
            3. great light ouput


            everything else that can go into is optional for me

            Comment


            • #7
              Re: Interest List: Unqiue Coatings Projector Retrofit

              I'd be seriously interested if I could get pics of a finished headlight assembly.
              2010 Hyundai Genesis Coupe Premium Edition
              2.0 Turbo 5-Speed Automatic
              Tsukuba Red

              Comment


              • #8
                Re: Interest List: Unqiue Coatings Projector Retrofit

                Is there a ballpark figure for these yet?

                Originally posted by BAMBAMM
                I'm about the best wingman in the San Joaquin Valley...........I'm the guy that will hit on the ugly friend, so you can swoop in and bag the hottie friend.

                Comment


                • #9
                  Re: Interest List: Unqiue Coatings Projector Retrofit

                  interested
                  sigpic

                  Comment


                  • #10
                    Re: Interest List: Unqiue Coatings Projector Retrofit

                    Interested.

                    I hope there is an option for black headlights
                    Make me a signature and ill put it in here...

                    Comment


                    • #11
                      Re: Interest List: Unqiue Coatings Projector Retrofit

                      Originally posted by 1BADG6GT
                      Is there a ballpark figure for these yet?
                      Need to know an approximate cost of these....
                      We can work out the details about core options later.

                      Comment


                      • #12
                        Re: Interest List: Unqiue Coatings Projector Retrofit

                        He won't be able to get an appropriate cost on these until he knows exactly what everyone is looking for, I pm'd him the link to this thread so hopefully he comes in here and gives at least a little bit of an estimate.

                        Lunch breaks are the heroes of my stomache!
                        Mods:

                        Comment


                        • #13
                          Re: Interest List: Unqiue Coatings Projector Retrofit

                          Originally posted by Fischer
                          Interested.

                          I hope there is an option for black headlights
                          and

                          Comment


                          • #14
                            Re: Interest List: Unqiue Coatings Projector Retrofit

                            Originally posted by StruttinSoul
                            He won't be able to get an appropriate cost on these until he knows exactly what everyone is looking for, I pm'd him the link to this thread so hopefully he comes in here and gives at least a little bit of an estimate.
                            Not trying to be an ass or anything but, all he needs to give us is a ballpark figure of "basic" pojectors...... the other options would be entirely up to each individual.... besides we kind of already know what each aditional option cost, such as halos and painted bezels, etc.

                            Originally posted by BAMBAMM
                            I'm about the best wingman in the San Joaquin Valley...........I'm the guy that will hit on the ugly friend, so you can swoop in and bag the hottie friend.

                            Comment


                            • #15
                              Re: Interest List: Unqiue Coatings Projector Retro

                              Originally posted by bluegtp33
                              im interested


                              main goals which i already stated in the other thread


                              1. great cutoff line
                              2. no modification needed to frame behind headlight
                              3. great light ouput


                              everything else that can go into is optional for me

                              I would only want one projector though. Less time vested. cost will be lower. If you want it for the highs too. we can use one high/low beam projector. But im fine with just one for the low beam hosing. Needs to have an awesome cutoff like the picture in the first post.
                              Im definitely interested.
                              Ball park figure? This isn't a definitive list. You can take your name off at any time. Although it would be helpful to know a price. Don't put yourself on this list if you expect it to be $250; cause that isn't going to happen. You can look at this post to get an idea. of pricing.
                              Originally posted by cbrenn71
                              Originally posted by leong6gtp
                              As far as price goes. Would it be higher or lower than izndouche's was?
                              lower. he wants 695 for a retro. he's crazy.

                              750WHP Magnacharged GTO.....WTF!
                              TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
                              Show
                              -20% tint
                              -bohaman AUX-in radio mod
                              -Professionally heated seats

                              Comment

                              Working...
                              X