Tweet
Just Gauging interest to see how many people would be interested in purchasing an Xtreme-Doors Vertical Door Conversion Kit. Xtreme-Doors are a relatively new company however our products are made to the highest quality. The kits available are Xtreme-Doors Direct Bolt on 90 Degree Vertical Door Conversion Kit as well as the Direct Bolt on Non-90 Degree Vertical Door Conversion Kit. The 90 Degree Kit is Xtreme-Doors’ all new design and we are spreading the word by offering group buys. MSRP on this kit is $1099 plus shipping. MSRP on the Non-90 Kit it $899 plus shipping. Below is a list of Features of the 90 Degree Direct Bolt on Vertical Door Conversion Kit:
1) These are made of High Quality Steel and Aircraft grade Aluminum.
2) These come in a Bright Zinc Finish with the Hinge Holder Being Anodized Red (can anodize it different colours upon request) Can also replace the bright zinc with Electroless Nickel Plating upon request (will cost extra)
3) Kit comes with Four Nitrogen Gas struts for a total lifting force of 300lbs per door. (Stronger Gas Struts Available upon request for those who have lots of speakers, etc in their doors)
4) Allow the user to open the door normally if going vertical is not necessary
5) Bolt on Design
6) Can open 30 Degrees Horizontally and 90 Degrees Vertically and are completely adjustable
7) Self lubricating bushing at all points of movement and not messy grease fittings
8 ) Modular Hinge Design makes installation easier as the Arm can be removed from the backing plate. This Feature also increases the strength.
9) Fully adjustable featuring 3D Adjustability. You can adjust this kit horizontally (how far it opens horizontally, up to 30 Degrees), vertically (how far it opens vertically up to 90 Degrees) as well as the depth (how far the kit sticks out).
These kits will work on any vehicle whether it is a car, truck, or SUV. But we can pre-drill the necessary holes for many vehicles including the G6. In stock form, you must drill the holes yourself. The group buy will be open to all vehicles you might own.
Below is a list of features of the Non-90 Degree Vertical Door Conversion Kit:
1) These are made of High Quality Steel and Aircraft grade Aluminum.
2) These come in a Bright Zinc Finish with the Hinge Holder Being Anodized Red (can anodize it different colours upon request) Can also replace the bright zinc with Electroless Nickel Plating upon request (will cost extra)
3) Kit comes with Two Nitrogen Gas struts for a total lifting force of 800lbs per door. (Stronger Gas Struts Available upon request for those who have lots of speakers, etc in their doors)
4) Allow the user to open the door normally if going vertical is not necessary
5) Bolt on Design
6) Can open 40 Degrees Horizontally and 70 Degrees Vertically
7) Self lubricating bushing at all points of movement and not messy grease fittings
8 ) Modular Hinge Design makes installation easier as the Arm can be removed from the backing plate. This Feature also increases the strength.
9) Fully adjustable featuring 3D Adjustability. You can adjust this kit horizontally (how far it opens horizontally, up to 40 Degrees), vertically (how far it opens vertically up to 90 Degrees) as well as the depth (how far the kit sticks out).
10) Xtreme-Doors Unique LPP (Lower Pivotal Point) increases the rigidity of the kit and allows the kit to pivot Horizontally on two point instead of one like other kits.
Below are a list of Discounts and how they are achieved:
90 Degree Direct Bolt On Vertical Door Conversion Kits
1-5 people – Price would be $700 plus $45 for shipping to anywhere in the US and $30 to anywhere in Canada
6-10 – Price would be $600 plus $45 for shipping to anywhere in the US and $30 to anywhere in Canada
10+ - Price would be $500 plus $45 shipping to anywhere in the US and $30 to anywhere in Canada
Non-90 Degree Direct Bolt on Vertical Door Conversion Kits
1-5 people – Price would be $600 plus shipping to anywhere in the US and $30 to anywhere in Canada
6+ - Price would be $500 plus shipping to anywhere in the US and $30 to anywhere in Canada
We have lots of these kits in stock as we are the manufacturer so as soon as we see what kind of interest there will be, we will get the group buy happening, and we will be able to ship the kits as soon as payment is received. Post or PM any questions your might have. If you are interested, please post or PM me letting me know which kit you are interested in so I can add you to the list. For more information about the kit and the company visit our website http://www.xtreme-doors.com . Can also be reached by email at sales@xtreme-doors.com
Thanks
1) These are made of High Quality Steel and Aircraft grade Aluminum.
2) These come in a Bright Zinc Finish with the Hinge Holder Being Anodized Red (can anodize it different colours upon request) Can also replace the bright zinc with Electroless Nickel Plating upon request (will cost extra)
3) Kit comes with Four Nitrogen Gas struts for a total lifting force of 300lbs per door. (Stronger Gas Struts Available upon request for those who have lots of speakers, etc in their doors)
4) Allow the user to open the door normally if going vertical is not necessary
5) Bolt on Design
6) Can open 30 Degrees Horizontally and 90 Degrees Vertically and are completely adjustable
7) Self lubricating bushing at all points of movement and not messy grease fittings
8 ) Modular Hinge Design makes installation easier as the Arm can be removed from the backing plate. This Feature also increases the strength.
9) Fully adjustable featuring 3D Adjustability. You can adjust this kit horizontally (how far it opens horizontally, up to 30 Degrees), vertically (how far it opens vertically up to 90 Degrees) as well as the depth (how far the kit sticks out).
These kits will work on any vehicle whether it is a car, truck, or SUV. But we can pre-drill the necessary holes for many vehicles including the G6. In stock form, you must drill the holes yourself. The group buy will be open to all vehicles you might own.
Below is a list of features of the Non-90 Degree Vertical Door Conversion Kit:
1) These are made of High Quality Steel and Aircraft grade Aluminum.
2) These come in a Bright Zinc Finish with the Hinge Holder Being Anodized Red (can anodize it different colours upon request) Can also replace the bright zinc with Electroless Nickel Plating upon request (will cost extra)
3) Kit comes with Two Nitrogen Gas struts for a total lifting force of 800lbs per door. (Stronger Gas Struts Available upon request for those who have lots of speakers, etc in their doors)
4) Allow the user to open the door normally if going vertical is not necessary
5) Bolt on Design
6) Can open 40 Degrees Horizontally and 70 Degrees Vertically
7) Self lubricating bushing at all points of movement and not messy grease fittings
8 ) Modular Hinge Design makes installation easier as the Arm can be removed from the backing plate. This Feature also increases the strength.
9) Fully adjustable featuring 3D Adjustability. You can adjust this kit horizontally (how far it opens horizontally, up to 40 Degrees), vertically (how far it opens vertically up to 90 Degrees) as well as the depth (how far the kit sticks out).
10) Xtreme-Doors Unique LPP (Lower Pivotal Point) increases the rigidity of the kit and allows the kit to pivot Horizontally on two point instead of one like other kits.
Below are a list of Discounts and how they are achieved:
90 Degree Direct Bolt On Vertical Door Conversion Kits
1-5 people – Price would be $700 plus $45 for shipping to anywhere in the US and $30 to anywhere in Canada
6-10 – Price would be $600 plus $45 for shipping to anywhere in the US and $30 to anywhere in Canada
10+ - Price would be $500 plus $45 shipping to anywhere in the US and $30 to anywhere in Canada
Non-90 Degree Direct Bolt on Vertical Door Conversion Kits
1-5 people – Price would be $600 plus shipping to anywhere in the US and $30 to anywhere in Canada
6+ - Price would be $500 plus shipping to anywhere in the US and $30 to anywhere in Canada
We have lots of these kits in stock as we are the manufacturer so as soon as we see what kind of interest there will be, we will get the group buy happening, and we will be able to ship the kits as soon as payment is received. Post or PM any questions your might have. If you are interested, please post or PM me letting me know which kit you are interested in so I can add you to the list. For more information about the kit and the company visit our website http://www.xtreme-doors.com . Can also be reached by email at sales@xtreme-doors.com
Thanks
Still think it would have looked good on a 3rd gen eclipse 
Comment