Ok ill start off by saying that I nor my father are NOT RESPONSIBLE for any screw ups, made by you or any other person by following instructions posted here.
Ok now lets get down to business. You will need a Drill with a philips bit, needle nose plyers, and a regular philips screw driver.
So I had a fuse splitter installed so it made it alot easier, if you need to know about how to install the fuse splitter talk to Chris.
Now Pics Of the Product from ledunderbody.
First Your going to want to strip the wires just a little to give you some room to work with.
Black and red is the electrical wire....
Plain black is the ground.
Second u wana squeeze the red and black wire into the fuze splise as done here.
Third there is a grounding plate, Use a 10mm Socket and unscrew the bolt. And attach the wire and screw back on.
Run everything as normal where u want it. There is a little opening between the console to thread the leds and the controller. Here is the rest of the pics and a VID!!!
Ok now lets get down to business. You will need a Drill with a philips bit, needle nose plyers, and a regular philips screw driver.
So I had a fuse splitter installed so it made it alot easier, if you need to know about how to install the fuse splitter talk to Chris.
Now Pics Of the Product from ledunderbody.
First Your going to want to strip the wires just a little to give you some room to work with.
Black and red is the electrical wire....
Plain black is the ground.
Second u wana squeeze the red and black wire into the fuze splise as done here.
Third there is a grounding plate, Use a 10mm Socket and unscrew the bolt. And attach the wire and screw back on.
Run everything as normal where u want it. There is a little opening between the console to thread the leds and the controller. Here is the rest of the pics and a VID!!!
Comment