Hi,
I just pit some pin striping on our G6 Convertible. All our cars are white and have basically the same striping added. The striping is the very fine, 2 stripe black tape, and follows just below the crease line. The crease line runs out in the forward part of the door and front fender, so I ran a piece of masking tape from the door handle following the crease straight to the wheel well of the fender, ABOVE the crease line. I then added the striping below the masking tape. It seems to tastefully break up the large "slab" side of the car. :warped:
See pictures:
I just pit some pin striping on our G6 Convertible. All our cars are white and have basically the same striping added. The striping is the very fine, 2 stripe black tape, and follows just below the crease line. The crease line runs out in the forward part of the door and front fender, so I ran a piece of masking tape from the door handle following the crease straight to the wheel well of the fender, ABOVE the crease line. I then added the striping below the masking tape. It seems to tastefully break up the large "slab" side of the car. :warped:
See pictures:
Comment