i aske dover in the anel eyes threda but i doubt may will float through there. i was wondering does anybody know where the negative ground is? and which cicuit on that board next to the battery is for the fogs?if thats even the right circuit board? im gonna connect my angels eyes to the fogs so that they come on when i press that button and i need to know whivh circuit it is. picture if possible?
Announcement
Collapse
No announcement yet.
Need some help please
Collapse
X
-
Need some help please
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seatsTags: None
-
Re: Need some help please
Originally posted by bluegtp33not sure out by the battery, but you can follow it from button?
what if you want your angel eyes on and not the fogs though? cant you just throw in your own switch?
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
If you look on the backside of the radiator support you will see quite a few bolts with wires connected to them. These are all ground wires that are grounding to the chassis. You can loosen one and wrap your ground from the halos around it, then tighten it back up.
By radiator support I am referring to the metal piece that the headlights bolt to. Just follow the backside of that and you will see a couple.2008 Cobalt SS/TC
14 flat @ 30mpg
Comment
-
Re: Need some help please
thank you buddy!
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
i looked on the back of the lid and it said two differnent things. so i am unsure which fuse to go to.
under Micro reley it saya 36 FRT FOG, then under Minifuses it says 10 FRT FOG LP 15A, whihc do i use? since no one seems to know which one,
whihc fuse can i hook the red wire into so that its on with the DRLs i think most ppl did that with HIDS and such.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
anybody want ot circle the fuse i need ot connect to?
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
thanks i was confuzed just because i forgot that it was the amp rating on top and not the number on the diagram. i didnt eat all day so i didnt get my brain food, i ended up taping into the lights fuse becuase the fogs was a all time hot connection and the halos didnt go off even if the car was off. thanks anyways
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
Originally posted by leong6gtpthanks i was confuzed just because i forgot that it was the amp rating on top and not the number on the diagram. i didnt eat all day so i didnt get my brain food, i ended up taping into the lights fuse becuase the fogs was a all time hot connection and the halos didnt go off even if the car was off. thanks anyways2009 PONTIAC G8
MAGNETIC GRAY METALLIC
Comment
-
Re: Need some help please
Originally posted by ragingfishOriginally posted by leong6gtpthanks i was confuzed just because i forgot that it was the amp rating on top and not the number on the diagram. i didnt eat all day so i didnt get my brain food, i ended up taping into the lights fuse becuase the fogs was a all time hot connection and the halos didnt go off even if the car was off. thanks anyways
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Need some help please
Originally posted by leong6gtpOriginally posted by ragingfishOriginally posted by leong6gtpthanks i was confuzed just because i forgot that it was the amp rating on top and not the number on the diagram. i didnt eat all day so i didnt get my brain food, i ended up taping into the lights fuse becuase the fogs was a all time hot connection and the halos didnt go off even if the car was off. thanks anyways2009 PONTIAC G8
MAGNETIC GRAY METALLIC
Comment
Comment