Edit: Just finished installing them! See pics down further.
Announcement
Collapse
No announcement yet.
I got my Redline Tuning Quicklifts today...NOW INSTALLED!!!
Collapse
X
-
I got my Redline Tuning Quicklifts today...NOW INSTALLED!!!
Tags: None
-
Awesome stuff! Nciely packaged and wonderful color instruction manual that is vehicle specific (featuring..MY Car!!!11! ).
If you have any questions Mike, give me a shout!Straight up Pimp Trollin'
2006 Silver MazdaSpeed 6 Grand Touring Sedan
w/ Real Working BOV Action!!!11!
"Zoom Zoom + 6psi Bitches!"
-
I definatly need to get my hands on this kit, such a help that it shouldnt be passed up. Really makes me angry that GM wouldnt put this on the car stock!!Originally posted by ToyzOriginally posted by simplyredwhat do you guys think about switching up the teams again?!
Comment
-
I should be good. I put these on my Cougar, it was my first time ever using a rivet gun. I have the same one they show in the picture! Only because I didn't have one at the time and I thought hell, I'll buy that one! haha
Comment
-
Yeha, I have the same too, lol. Craftsman RAWKS!
I've installed 3 sets on my own..it was a treat to see the pros at work doing it, though!Straight up Pimp Trollin'
2006 Silver MazdaSpeed 6 Grand Touring Sedan
w/ Real Working BOV Action!!!11!
"Zoom Zoom + 6psi Bitches!"
Comment
-
Haha I couldn't resist it. I was so bored and had time to kill so I installed them. It took me about an hour and 20 minutes. I would have been done sooner, but I came across two issues:
1. On one of the struts, the locking clip for the ball joint near the hood was on the wrong side. It was on the inside, in between the bracket and hood. Could NOT fit a finger in there. So I had to figure out how to get it on there. Finally I just decided to take the ball joint off, slip the clip in partially, then try to get the ball joint on while holding the clip there. Then once it was on I put the clip all the way through and locked it on.
2. Not really an issue, but I couldn't figure out why the redline tuning logo is facing upward on one strut, and downward on the other one. No big deal though.
Here's some pics:
Overall excellent quality workmanship!!
Comment
-
Yea they're pretty strong. I put a rag up against my garage wall, held the cylinder end of the strut, and pressed them into wall. It took some muscle, but eventually they compressed.
Comment
-
mmm looks pretty damn good. i wasnt so sure about it but im liking it now
Mods- VMS ECM/TCM Tune, Custom Magnaflow Cat Back, Full CRAB Intake, Racing Line Motor Mounts and Strut Tower Brace. Tinted Windows & Tails. EBC USR Rotors Front and Rear running YellowStuff Pads
Originally posted by ahuhnso i just realized there a drawer in my room that has nothing in it but tequila, condoms and a blow up doll. cant figure out if thats a good thing or not
Comment
-
You can still get in on it guys! Great work Mike, looks just like mine!
Sticker son my struts ar ethe same way.. I think there isn't a way around that unless they had one sticker made in a mirrored fasion! :idea:Straight up Pimp Trollin'
2006 Silver MazdaSpeed 6 Grand Touring Sedan
w/ Real Working BOV Action!!!11!
"Zoom Zoom + 6psi Bitches!"
Comment
-
Awesome SauceTRADED IN BUT NEVER FORGOTTEN: 2006 GT Coupe in granite metallic, 15/5% tint, vinyl side marker deletes, Doctor Speed Stage 3 CAI, RED calipers by DupliColor, RED LED interior lights, 45 LED tail lights, WideView 8000K HID coversion kit, Nokya Artic White fogs installed, running MoBil 1, FIRST ever granite metallic color matched headlights!! Color matched eyelids just finished! GT-R Exhaust installed. R1 Concepts drilled and slotted zinc plated front rotors.
Comment
Comment