Tweet
I thought these were pretty cool... beats the plain old valve caps we got.
-
Re: pontiac valve stem caps
I was actually looking at those...but if you loose one...it will look uneven, and you would have to buy another set.sigpic
Electrical: * SPYDER Smoke Halo Projector Headlights w/ Morimoto H1 projector retrofit and custome LED Halo rings * HID Conversion Kit 8000K * Alpine Type S SPS-619 and SPS-610C Speakers * MTX Terminator TNP212D2 Dual 12" Subwoofers * Red LED Lighting Front + Dome, Blue LED in Trunk, White LED License Plate * Tinted Tail Lights/LED's Looks: * Carbon Fiber Decals * 15% Tint in the Back and on Top of Windshield, 35% Tint in the Front * Tinted cover on Licence plate * 5mm Wheel Spacers in the Front, 25mm in the Back * Enkei EKM 3 in Hyper Silver 18x8 Performance: * Flowmaster Muffler 80 Series w/ Cherry Bomb Glasspack, 3.5" Double Walled/Slant Exhaust Tips * Michelin Pilot Sport A/S Plus on 225/45/18 * Brembo conversion in the front * BMD SS brake lines * CMS springs * Racingline strut bar -
Re: pontiac valve stem caps
how often do you lose a valve stem cap unless someone stole it haComment
-
Re: pontiac valve stem caps
Well lets just say that I don't live in the richer part of town...and these "guppies" are attracted to anything shine...lol jk but those dam magpie guys, where I change the oil, magically happen to loose them in they're 200 sq ft area every time...In about 2 years, they could open up shop and start selling them to me at a discount priceOriginally posted by penelopeTHEg6 View Post
lol
sigpic
Electrical: * SPYDER Smoke Halo Projector Headlights w/ Morimoto H1 projector retrofit and custome LED Halo rings * HID Conversion Kit 8000K * Alpine Type S SPS-619 and SPS-610C Speakers * MTX Terminator TNP212D2 Dual 12" Subwoofers * Red LED Lighting Front + Dome, Blue LED in Trunk, White LED License Plate * Tinted Tail Lights/LED's Looks: * Carbon Fiber Decals * 15% Tint in the Back and on Top of Windshield, 35% Tint in the Front * Tinted cover on Licence plate * 5mm Wheel Spacers in the Front, 25mm in the Back * Enkei EKM 3 in Hyper Silver 18x8 Performance: * Flowmaster Muffler 80 Series w/ Cherry Bomb Glasspack, 3.5" Double Walled/Slant Exhaust Tips * Michelin Pilot Sport A/S Plus on 225/45/18 * Brembo conversion in the front * BMD SS brake lines * CMS springs * Racingline strut barComment
-
Re: pontiac valve stem caps
hahahaha... well you've made your point... and thats pretty rediculous about losing them all the time.Originally posted by Trompii View PostWell lets just say that I don't live in the richer part of town...and these "guppies" are attracted to anything shine...lol jk but those dam magpie guys, where I change the oil, magically happen to loose them in they're 200 sq ft area every time...In about 2 years, they could open up shop and start selling them to me at a discount price lolComment
-
Re: pontiac valve stem caps
I had that same set but they faded very quickly, and are tiny. Since then I bought a better set (same place I got my mats from) that not only look better but are a bit bigger and visible compared to the ones you listed
here is a comparison
these cost little bit more but I would def suggest them over the others, plus these are guranteed not to sieze or break off causing major stem issues
Current: 2015 Volvo s60 t6 awd r-design platinum
Former: 2006 Pontiac G6 GTP 3.9L Sedan Silver loaded w/ GT-R Exhaust, CRABS CAB Intake w/ FPU, AIT Carbon Fiber hood & roof wing spoiler, GM Ground Effects Kit, Eagle Eyes black CCFL halo projectors, 18" Konig Airstrike rims, shadow chrome recessed upper/lower grilles, 35% tint all around, tinted tails, Kenwood Excelon X497 Head Unit, R1 concepts drilled/slotted rotors, silver door plate sills, Racingline STB, Bridgestone Potenza Pole Position tires, custom GTP floor/trunk mats, gm carbon silver interior trim kit, CF dart & pillar overlays/plate bracket, rs-1 cf/silver pedals, red calipers w/ GTP logos, chief badge replacements, red/silver painted engine/battery covers, windshield washer relocateComment
-
Re: pontiac valve stem caps
I have had a few sets. I won't buy any of them if they have a white background behind the dart. Mine ended up turning yellow. But I have a black set that look sweet and they've lasted a few years.Current Mods: K&N Typhoon Air Intake System, 10000K DDM HID Lows and fogs, 6000K Highs, 18" Forte Nokturnal rims, Michelin Pilot HX MXM4 Tires, Chrome upper and lower grilles, self tinted tail lights, self painted interior pieces, RacingLine front strut tower bar, GT-R exhaust, Blue painted Calipers, Lampoon blue dart overlays, LED reverse lights, sometimes a WAMS tune,Brembo Brake Conversion, Cobalt SS rear Brake conversion, 15mm H&R Spacers, ATE Super Blue Racing Brake Fluid, Eagle Eye CCFL Headlights, Optima Yellow top Battery, Moog Control Arms & Tie rod ends, BMD SS Brake Lines, BMD Swaybar Links, White LED Gauge Lights,
RIPINDIAN WARRIORS1926-2010Comment
-
Re: pontiac valve stem caps
well i've already placed my order but 7 dollars isn't going to break my account, so i guess next time around i'll order the ones you got! how long did the first set last you?Originally posted by ESU06GTP View PostI had that same set but they faded very quickly, and are tiny. Since then I bought a better set (same place I got my mats from) that not only look better but are a bit bigger and visible compared to the ones you listed
here is a comparison
these cost little bit more but I would def suggest them over the others, plus these are guranteed not to sieze or break off causing major stem issues
Comment
-
Re: pontiac valve stem caps
they still worked fine and didn't ruin anything or break off, but I'd say only a couple months until the dart fades, even those ones are something better than the plastic caps to look atCurrent: 2015 Volvo s60 t6 awd r-design platinum
Former: 2006 Pontiac G6 GTP 3.9L Sedan Silver loaded w/ GT-R Exhaust, CRABS CAB Intake w/ FPU, AIT Carbon Fiber hood & roof wing spoiler, GM Ground Effects Kit, Eagle Eyes black CCFL halo projectors, 18" Konig Airstrike rims, shadow chrome recessed upper/lower grilles, 35% tint all around, tinted tails, Kenwood Excelon X497 Head Unit, R1 concepts drilled/slotted rotors, silver door plate sills, Racingline STB, Bridgestone Potenza Pole Position tires, custom GTP floor/trunk mats, gm carbon silver interior trim kit, CF dart & pillar overlays/plate bracket, rs-1 cf/silver pedals, red calipers w/ GTP logos, chief badge replacements, red/silver painted engine/battery covers, windshield washer relocateComment
-
Re: pontiac valve stem caps
I got some full chrome ones from quick pressures ebay store....covers up the whole black stem and then you can order chrome caps or use these. then you can hid the black stem alsoComment
Comment