Announcement

Collapse
No announcement yet.

HELP!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HELP!

    I'm new to this forum, but not new to the Pontiac G6. I have a 2006 base model and just recently purchased a set of front and rear speakers to install in my car, but I've hit a road block... The speakers I bought are Rockford Fosgates 6x9's and 6 1/2's... The front speakers seem to be built into the speaker mount on my door, and I'm wondering if anybody has tackled this before? The fosgates came with a 6x9 adapter plate that will fit perfectly, but I don't want to start drilling into my car unless I know for a fact it HAS to be done! Also, the 6x9 screws that I was given are a tad bit too big for the stock holes already drilled... going to file those down a bit so my new screws fit..

    ANY help/ideas would be appreciated! Thanks you guys!

  • #2
    Re: HELP!

    the pictures are broken due to old thread but I found this by searching


    and of course i found it via this thread
    sigpic

    2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -

    GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian

    Turning and Stopping- Cquence Drilled and Slotted Rotors

    Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter

    Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,

    Fully modded G6 GTP-TRADED

    Comment


    • #3
      Re: HELP!

      Thanks so much! I was looking in all of the threads, but obviously not hard enough. LOL

      Comment

      Working...
      X