Does any one have a guide or video on how to remove stock exhaust and resonator and put in an after market set?
Announcement
Collapse
No announcement yet.
How to-exhaust
Collapse
X
-
Re: How to-exhaust
Go to an exhaust shop and have them do it.Custom Flowmaster Exhaust- CRAB Heat Shield- Tiger Ram- Painted Cals- Painted Grills- Eibach ProKit- Racingline S/B- Racingline G/K- Injen Air Intake- Spyder Headlights w/ DDM 5000k Lows- DDM 5000k Fogs- Plasti-Dip Solstice Wheels w/ 5mm Spacers/ Painted- Painted Intake Manifold- Hood Spacers- RotorPros Front/ Rear D/S Rotors- BMD-P Fr. Endlinks- BMD-P SS Brake Lines...
Progression:
http://www.g6performance.com/forum/s...ad.php?t=18485
-
Re: How to-exhaust
Originally posted by JGP21 View PostGo to an exhaust shop and have them do it.
it's a POS to do especially if you have rust on bolts. besides they don't charge you much at exhaust shops.
Crab intakes with Crab claws
Resonator delete
Magnaflow cat-back exhaust system
Racingline strut tower bar
Tinted taillights
18' Enkei Razr's with 225/45/18 Toyo Proxes
Painted calipers
Comment
-
Re: How to-exhaust
disregard the ladies in here. There are 2 bolts connecting the exhaust by the flex pipe and from there you should just spray some WD-40 on the hangers to remove the exhaust easily. From there hook up your new stuff and enjoy the new sound.
In the event you are creating your own and can weld just chop out the old and weld in the new mufflers and pipesigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: How to-exhaust
Originally posted by CrimsonGTP View Postdisregard the ladies in here. There are 2 bolts connecting the exhaust by the flex pipe and from there you should just spray some WD-40 on the hangers to remove the exhaust easily. From there hook up your new stuff and enjoy the new sound.
In the event you are creating your own and can weld just chop out the old and weld in the new mufflers and pipe
______________________The Untouchable!____________________
Comment
-
Re: How to-exhaust
when i did mine, i used two cans of WD-40 and bolts still not coming off. ended up using a heat gun.
Crab intakes with Crab claws
Resonator delete
Magnaflow cat-back exhaust system
Racingline strut tower bar
Tinted taillights
18' Enkei Razr's with 225/45/18 Toyo Proxes
Painted calipers
Comment
-
Re: How to-exhaust
Did you get the bolt on system or the clamp on system?
This one #16876: http://www.carid.com/2008-pontiac-g6...LAID=502373835
or
This one #16760: http://autoshepherd.com/magnaflow-16...t-systems.html
If you bought the first one, you need to get a chain cutter, jack stands (or ramps) and a pipe expander.
If you bought the second one, you need a wrench and a 5/8ths socket for the exhaust clamps.
Comment
-
Re: How to-exhaust
sounds like #1 is a PITA....sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
Comment