Anywayz right off the bat if your not already aware Im a beta tester & moderator on the HPTuners forum http://www.hptuners.com/forum/index.php we basically offer a tuning software package where you the end user get to read & modify your stock tune any way you choose. We do not offer starter files, but do offer a comprehensive help file http://www.hptuners.com/help/ as well as a
support forum with over 5200 members that are always willing to help new tuners. We have two basic packages
MPVI Standard-$499
MPVI Pro-$649
Both interfaces come with:
Our Scanning software
Our Editing software
Enough credits to tune up to 4 pcm locked vehicles of your choice
Our Pro interface ADDs over the Standard interface
Standalone datalogging of up to 1hr 30 minutes meaning theres no need to have a laptop in vehicle while your logging, just bring the hardware with you to the vehicle, plug it in, hit record & go
You can use 0-5v signals from various sensors such as EGT, Wide Band, fuel pressure and others for sensor input in our scanner. You will have real time data from those sensors right next to your standard scan tool data such as TPS, RPM, MPH, etc. In the end this will help tremendously in tuning because you can log a wideband sensor for accurate fueling right against your rpm's just like you'd see on a dyno printout.
We literally offer support for hundreds of GM vehicles as you can see on our supported vehicles list http://www.hptuners.com/products/vcmsuite_vehicles.php our hardware is also capable of communicating with ford/dodge protocol meaning its only a matter of time before they'll be added to our supported list as well.
We currently offer tuning for the 06-07 Pontiac G6 3.5 & 3.9 (3.5 in 07 only)
Here are some Flash demos of our program & how simple it is to navigate around http://www.hptuners.com/help/getting_started_demos.htm
And here are some screenshots of the scanner & editor software
Dashboard display
Table Display
Chart Display
Editor
Compare Feature
If you have any questions about our product or support please don't hesitate to ask.
Thanks
Bill
support forum with over 5200 members that are always willing to help new tuners. We have two basic packages
MPVI Standard-$499
MPVI Pro-$649
Both interfaces come with:
Our Scanning software
Our Editing software
Enough credits to tune up to 4 pcm locked vehicles of your choice
Our Pro interface ADDs over the Standard interface
Standalone datalogging of up to 1hr 30 minutes meaning theres no need to have a laptop in vehicle while your logging, just bring the hardware with you to the vehicle, plug it in, hit record & go
You can use 0-5v signals from various sensors such as EGT, Wide Band, fuel pressure and others for sensor input in our scanner. You will have real time data from those sensors right next to your standard scan tool data such as TPS, RPM, MPH, etc. In the end this will help tremendously in tuning because you can log a wideband sensor for accurate fueling right against your rpm's just like you'd see on a dyno printout.
We literally offer support for hundreds of GM vehicles as you can see on our supported vehicles list http://www.hptuners.com/products/vcmsuite_vehicles.php our hardware is also capable of communicating with ford/dodge protocol meaning its only a matter of time before they'll be added to our supported list as well.
We currently offer tuning for the 06-07 Pontiac G6 3.5 & 3.9 (3.5 in 07 only)
Here are some Flash demos of our program & how simple it is to navigate around http://www.hptuners.com/help/getting_started_demos.htm
And here are some screenshots of the scanner & editor software
Dashboard display
Table Display
Chart Display
Editor
Compare Feature
If you have any questions about our product or support please don't hesitate to ask.
Thanks
Bill
Comment