I have just installed a Jensen VM9311TS in dash dvd player and i followed the instructions and it works great. I just can't seem to get the dvd to show video when the e-brake isn't engaged. I read the forums and found out about hooking it up to a toggle switch which I did, but I have it hooked into the park brake circuit and when i flip the switch with the ebrake disengaged it, turns on the brake light on the dash and the car keeps on dinging loudly until I turn off the switch. Do I need to keep it hooked to the park brake circuit or where else should I try to stop this from dinging. Any Ideas please help out THANKS
PS this is the thread i read about it........
Since it's a DVD player, it had that safety lock on it where you have to wire it to the parking brake for it to play movies...I DON'T THINK SO! After doing 5 minutes of research, I found that you can just hook that wire to a toggle switch and flip it on and off when you please (No officer I was not watching a movie!) So I put a switch in the most discrete place ever...right in that little space in front of the shifter, on top.
PS this is the thread i read about it........
Since it's a DVD player, it had that safety lock on it where you have to wire it to the parking brake for it to play movies...I DON'T THINK SO! After doing 5 minutes of research, I found that you can just hook that wire to a toggle switch and flip it on and off when you please (No officer I was not watching a movie!) So I put a switch in the most discrete place ever...right in that little space in front of the shifter, on top.
Comment