does anyone know if you can purchase lowering springs for the rear only? I'd like to lower the back to make it look like the front.
Announcement
Collapse
No announcement yet.
lowering back only
Collapse
X
-
I would think, you could just buy a set of springs and only swap out the back ones.
But I'm thinking doing only the back will throw off performance.
Good luck with it either way though! I'm curious to see how it would look level (since they definitly seem to be pointing downward)Originally posted by TLS2000Fine. You're banned. Stupid redneck piece of shit!
GTP: My list of mods got too long... just click the link
-
As far as I know especially with the limited springs available for the G6, you would have to buy a full set. If it were a honda or a more popular car you could ebay just a rear set probably. Anywho, I dont forsee any problems with lowering just a rear but it might throw off the feel of the car a little?! Alot of people in other cars have lowered just the front or rear, I know Cobalts had a hight sitting rear end so alot of people were lowering just the rear! But for now I imagine your best be being to order a full set and just save the fronts incase you ever want them, or if someone else does in the future!
Hope that helps some!Originally posted by ToyzOriginally posted by simplyredwhat do you guys think about switching up the teams again?!
Comment
-
well... you're putting weight bias towards the rear... on a front wheel drive car
I'd imagine you'd lose traction more easily, so you'll have to accelerate slower, and will lose some steering ability
granted, if you are just dropping it a bit, the difference will be small... but you definitly won't be helping but if you prefer the leaning back stance to performance, go for it
(I prefer a forward/down stance my self...)Originally posted by TLS2000Fine. You're banned. Stupid redneck piece of shit!
GTP: My list of mods got too long... just click the link
Comment
-
Never cut springs. They werent meant to be cut, that can really fuck up your day My one buddy had somebody do that, it came out great, rode around n nothing happened. Until one after noon when it started to rain, the spring cracked under pressure and made the car slam on the shock alone. He's ok, but the suspension is fucked. Just my .02
Comment
-
Before anyone else replies to that silly idea: I'm sure that Jordie was joking, as he knows quite a bit about cars.
sigpic
Mobil 1 | Doctorspeed Stage 3 & 4 CAI | CRABS | Sacchi S45 245 Black 18" Rims | 6000k HID Headlights + Fogs | GT-R Exhaust | 20% Tint | Pioneer AppRadio 2
Comment
-
He said he wanted it to look like the front. I thought low rider though.G6P member 340
G8 GT 334 0f 1st 888
Pedders Street II suspension. Pedders Strut Tower bar. VMS HSRK, VMS PCM/TCM tune, Forged and Stroked LS3, Garrett Turbo
Borla Cat back. SLP underdrive pulley. FAST ported 102 intake and TB ported. BMR trailing arms, Circle D 3200 stall converter.
20 percent tint by Scott's tinting and graphics.
Comment
-
Ya, But i didnt know if he was referring to the wheel gap or the bottom of the body. I really didnt think there was much of a difference on how the gtps sit, but then again i have a gt sedanHurricanes are like women : when they come, they're wet and wild, but when they leave they take your house and car.
Comment
Comment