Not sure if that's what its called, but I noticed the other day when I was debadging the doors that the strip that runs along the length of the car is coming unstuck right at the end. Its still holding well, just isn't quite flush with the body. Is there anything I can do to stick it back on without having to take the whole thing off and restick it?
Announcement
Collapse
No announcement yet.
Side molding coming unstuck
Collapse
X
-
Re: Side molding coming unstuck
It shouldn't go anywhere since there's holes behind it holding it on. I'd get some kind of adhesive to tack the end down
'08 G8 GT... 1 7/8" Kooks Blue Ceramic Coated Long tube Headers... 3" Xpipe...Magnaflow axle backs...Rotofab CAI...Heater hose relocate. Ported throttle body, intake manifold, Custom grind cam 227/237 .620/.604 LSA 113 +3, Circle D 3200 stall, 3.45 rear gear,Tuned by Redline
Dyno 438 WHP 415 WTQ
'15 Chevy SS Some Like It Hot Red Holden Grill & trunk badge... Solo performance axle backs... Rotofab Intake, Mobile attractions front splitter
Comment