What would i have to do to build up my tranny and how much would it cost?
Announcement
Collapse
No announcement yet.
Tranny work
Collapse
X
-
Re: Tranny work
buy a 4t65e-hd.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Tranny work
a transmission.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Tranny work
have it built by Raptor. theres a few reputable builders out there.
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Tranny work
Originally posted by FightingIrish99Originally posted by Rannin RavensightDepends on your transmission and what you wish to do with it.
turbo.
no one will ever turbo a g6.
ever.The Present: 2010 Mazdaspeed3... Zoom Zoom
The Past: 06 G6 GTP Vert: Westers Tune - GT-R Exhaust - Doc's Stage3 CAI+ CRAB O4+K&N - GMPD Strut - RL Street Inserts - CMS Bespoke Vert Lowering Springs - Quicklifts - Enkei FN18's, N3000's 245/45y18 - 35% Tint Around - 4300k HIDs His & Los - Black Headlight bezels - Black Recessed Grills - Pooners Chrome Trim Blackout - Black Overlays on Darts - Avic f700bt
Comment
-
Re: Tranny work
Originally posted by colinpeddleOriginally posted by FightingIrish99Originally posted by Rannin RavensightDepends on your transmission and what you wish to do with it.
turbo.
no one will ever turbo a g6.
ever.sigpic
2004 LS1 A4 Quicksilver w/ Red Interior 1 of 301 -
GO-K&N Intake, Spintech Exhaust, Pacesetter Headers, Catless Mids, Tuned using HPTuners By Rian
Turning and Stopping- Cquence Drilled and Slotted Rotors
Show- SAP Repros in Satin black, fake SAP mod, Tinted tails by Jorge, Satin Black Badges, 35% tint all around, Satin Black painted 17's, Flat Splitter
Electronics- Pioneer AVIC F90BT, JL 500.1 Monoblock Amp, JL 12W3-2, DDMTuning 8k 55watt HID hi/low, All Interior and Cluster LED Swap by Bohnman,
Fully modded G6 GTP-TRADED
Comment
-
Re: Tranny work
Originally posted by luciferI just wanted to point out...had I not been so clear that this forum was about cars, this thread's title would deeply disturb me....
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
-
Re: Tranny work
I agree its unlikely it will be ever be force fed but didnt some one have a turbo
a couple years ago?
Im not up to date on everything since i took a couple year break on the forums and recently returned.
He had a black gtp coupe.
Yeah i couldn't resist clicking this thread LOLMy Progress threadhttp://www.g6performance.com/forum/s...282#post429282
Comment
-
Re: Tranny work
Originally posted by DanielI agree its unlikely it will be ever be force fed but didnt some one have a turbo
a couple years ago?
Im not up to date on everything since i took a couple year break on the forums and recently returned.
He had a black gtp coupe.
Yeah i couldn't resist clicking this thread LOL
750WHP Magnacharged GTO.....WTF!
TVS2300 GTO, Innovators West 8" Overdrive Pulley, ECS Tensioner, SD tuned by Andrew at Complete street performance, Ed Curtis custom Lunati camshaft 230/236 .6XX/.6XX 113 LSA, Hardened Pushrods, Lunati .675 lift Valve Springs, Single Walbro 255 fuel pump in stock bucket, Kooks 1 7/8 Jet hot coated Headers , Kooks 3" catless mid pipes with DMH low pro electric cutouts, Spintech 2.5" stainless steel exhaust with X pipe, Carbon fiber Cold air box with AEM air filter, Billet products short shifter, JamesBiz Oil catch can, Pedders 5/16" raise springs with drag bags, Weld RTS Black with Hoosiers
Show
-20% tint
-bohaman AUX-in radio mod
-Professionally heated seats
Comment
Comment