Announcement

Collapse
No announcement yet.

Help with HIDs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with HIDs

    Just got some xentec 5000k HID bulbs for my low lights and installed them with no issues, my problem is I'm not sure where to wire the cables through. there's no way for me to put the cover back on over these like I could with my halogens. the black, green, yellow cables in the top of the pic are wired through a firewall but its not open for any additional wires



    is it a problem if it stays open?

  • #2
    Re: Help with HIDs

    Everyone generally cuts a hole through the middle of the dust cover.

    Comment


    • #3
      Re: Help with HIDs

      I ordered one with a precut hole off Amazon. Is it a problem to drive around without for a few days?

      Comment


      • #4
        Re: Help with HIDs

        See that grommet with the green. Yellow and black wires going through in the top of your pic?
        I tucked my wiring in the light and ran my wires through that grommet

        Comment

        Working...
        X